Relay
Relay
Sort by
Show result
  • Omron 5V solid state relay (240V, 2A), 
  • Output port with resistance-type fuse (240V, 2A)
  • With blue KF301 terminal, more convenient for control line.
  • Size: 25 x 34 x 22mm
  • Weight: 11g
RM8.20
  • 5V 1 channel relay interface board
  • Selectable high level trigger or low level trigger
  • Build in Opto-Isolator IC for protection
  • With blue KF301 terminal, more convenient for connection
  • Can control various appliances with large current and high voltage
  • Can be controlled directly by microcontroller such as Arduino, 8051, AVR, PIC, DSP and ARM
RM5.70
  • Omron 5V solid state relay (240V, 2A), 
  • Output port with resistance-type fuse (240V, 2A)
  • With blue KF301 terminal, more convenient for control line.
  • Size: 32 x 54 x 22mm
  • Weight: 20g
RM15.20
  • 5V 1 channel relay interface board
  • Selectable high level trigger or low level trigger
  • Build in Opto-Isolator IC for protection
  • With blue KF301 terminal, more convenient for connection
  • Can control various appliances with large current and high voltage
  • Can be controlled directly by microcontroller such as Arduino, 8051, AVR, PIC, DSP and ARM
RM8.60
  • Jumper cap can set output port to high potential or pull down to GND 
  • Using 2-way 817 optocoupler, to achieve the control signal and the control signal isolation
  • You can directly use the microcontroller or other devices IO port to achieve voltage isolation control
  • You can achieve a small voltage control, the control side can be an external transistor MOS tube or different voltage levels Of the device interface
RM7.90
  • Omron 5V solid state relay (240V, 2A), 
  • Output port with resistance-type fuse (240V, 2A)
  • With blue KF301 terminal, more convenient for control line.
  • Number of channel: 4
  • Input control signal: 0-2.5V (low level, relay ON), 3.3-5V (high level, relay OFF)
RM28.10
  • 5V 1 channel relay interface board
  • Selectable high level trigger or low level trigger
  • Build in Opto-Isolator IC for protection
  • With blue KF301 terminal, more convenient for connection
  • Can control various appliances with large current and high voltage
  • Can be controlled directly by microcontroller such as Arduino, 8051, AVR, PIC, DSP and ARM
RM15.90
  • Jumper cap can set output port to high potential or pull down to GND 
  • Using 4-way 817 optocoupler, to achieve the control signal and the control signal isolation
  • You can directly use the microcontroller or other devices IO port to achieve voltage isolation control
  • You can achieve a small voltage control, the control side can be an external transistor MOS tube or different voltage levels Of the device interface
RM12.20
  • Omron 5V solid state relay (240V, 2A), 
  • Output port with resistance-type fuse (240V, 2A)
  • With blue KF301 terminal, more convenient for control line.
  • Number of channel: 8
  • Input control signal: 0-2.5V (low level, relay ON), 3.3-5V (high level, relay OFF)
RM55.20
  • 5V 1 channel relay interface board
  • Selectable high level trigger or low level trigger
  • Build in Opto-Isolator IC for protection
  • With blue KF301 terminal, more convenient for connection
  • Can control various appliances with large current and high voltage
  • Can be controlled directly by microcontroller such as Arduino, 8051, AVR, PIC, DSP and ARM
RM28.90
  • Up to 10A DC load current
  • Control voltage from 3 to 32VDC
  • Build-in protection cover
  • With LED indicator showing SSR On/ Off
  • It serves the same function as an electromechanical relay, but has no moving parts.
RM19.80
  • MY2N is industrial common uses relay found in all type of industrial equipment.
  • Very reliable and suitable for long term use.
  • Contact can switch up to 240VAC 5A load.
  • 12VDC, 24VDC or 240VAC model available.
  • Suitable for use in power hungry device, such as RS-775 DC motor, heater, pump, TEC.
RM6.90
  • MY2N is industrial common uses relay found in all type of industrial equipment.
  • Very reliable and suitable for long term use.
  • Contact can switch up to 240VAC 5A load.
  • 12VDC, 24VDC or 240VAC model available.
  • Suitable for use in power hungry device, such as RS-775 DC motor, heater, pump, TEC.
RM8.90
  • MY2N is industrial common uses relay found in all type of industrial equipment.
  • Very reliable and suitable for long term use.
  • Contact can switch up to 240VAC 5A load.
  • 12VDC, 24VDC or 240VAC model available.
  • Suitable for use in power hungry device, such as RS-775 DC motor, heater, pump, TEC.
RM3.90
  • Allows Arduino to switch On/Off to 36V 20A load
  • Wide load voltage DC 5-36V
  • Accept digital or PWM input signal
  • Using 60V 210A high current MOSFET with big heatsink to ensure module remain cool during operation
  • Optocoupler to prevent high voltages from affecting the system receiving the signal
  • 4 mounting hole for easy installation
RM19.90