Free shipping by J&T Express for orders overRM100.00
Latest Products
Sort by
Show result
  • Surface: Nickel plating
  • Material: Steel
  • Thickness: 2mm
  • Dimension: Refer product image
  • Weight: 10g
RM2.00
  • Accept wide range of volatge, DC 6V to 36V
  • Easy installation with threaded screw body
  • Industry-standard NPN or PNP output
  • Object detected indication
RM10.50
  • Value: Select in option
  • Watt: 0.5 Watt
  • Tolerance: 10%
RM0.50
  • It is a component widely used in the automatic control industry for detecting, controlling, and noncontact switching. When the proximity switch is close to some target object, it will send out a control signal.
  • As it is a capacitive type proximity switch, its detecting object target is not limited to an only conductor, but also liquid and even powder things, like plastic, water, glass, oil, etc.
  • It's widely used in machines, paper making, the light industry for limiting stations, orientation taking count, speeding trials, etc.
  • Integrated circuit proximity switch which is composed of oscillator and shaping amplifier oscillator start-up after induction head switches the last alternating magnetic field.
  • This series of proximity switches for high-frequency oscillation with no contact, no pressure, no spark, quickly issued a detection signal.
  • This series of proximity switches are widely used in modern industry, machinery, metallurgy, transportation, electric power, military, textile, chemical, mining, scientific research departments of machine tools, and industrial automatic production lines.
  • This switch includes a high-frequency oscillating circuit, detection circuit, amplifier circuit, trigger circuit, and output circuit.
RM26.50
  • Brand new and high quality
  • Common use power cord socket
  • Max Current Rating: 10A
  • CLip type or screw type
RM1.00
  • Wide range input voltage: 4.5V to 32V
  • Adjustable output voltage: 5V to 35V
  • Step up converter, Vout > (Vin + 1V)
  • Maximum output current (No Display): Peak: 3A [Heatsink required], Continuous: 2A
  • Maximum output current (With Display): Peak: 4A [Heatsink required], Continuous: 3A
  • Output voltage ripple: 30mV
  • Switching frequancy: 400KHz
  • Efficiency: 92% max
  • Rated Power: 20W
  • Operating temperature: -45ºC to +85ºC
  • Dimension (No Display): 43x21x14mm
  • Dimension (With Display): 60x35mmx14mm
  • Weight (No Display): 12g
  • Weight (With Display): 24g
RM3.60
  • Connector: Dupont (2.54mm) Pitch
  • Mount style: Self-Adherence
  • Max. circuit rating: 35VDC, 100mA
  • Insulation spec.: 100M Ohm, 100V
  • Dielectric withstand: 250Vrms (60Hz, 1min)
  • Contact bounce: 5ms
  • Life expectancy: 1 million closures
RM2.50
  • This is a 3.3 VDC voltage regulator that converts input voltage ranging from 4.5 to 7 VDC into 3.3 VDC
  • Output 3.3V 800mA (load current cannot exceed 800mA)
  • With power indicator
  • No reverse polarity protection
RM1.50
  • This 100mW laser module emits a small intense focused beam of visible red light
  • Laser transmitter module provides a small but intense beam
  • The module can be used with Arduino board
  • Avoid looking directly at the beam to prevent damage to eyesight
  • With mounting hole for easy installation
RM2.00
  • Tested board comes with a 20-20KHz electret microphone soldered on. 
  • Use the Maxim MAX4466, an op-amp specifically designed for this delicate task
  • Has excellent power supply noise rejection, good amplifier sounds
  • With Adjustable Gain Module is best used for projects such as voice changes
  • Audio recording/sampling, and audio-reactive projects that use FFT. 
  • Rail-to-Rail Outputs
  • Low 24µA Quiescent Supply Current 
RM7.90
  • Type: NPN
  • Collector-Emitter Voltage: 400 V
  • Collector-Base Voltage: 500 V
  • Emitter-Base Voltage: 6 V
  • Collector Current: 0.3 A
  • Collector Dissipation: 0.625 W
  • DC Current Gain (hfe): 50 to 200
  • Transition Frequency: 50 MHz
  • Operating and Storage Junction Temperature Range: -55 to +150 °C
  • Package: TO-92
RM0.50
  • Transistor Polarity: NPN 
  • Collector Emitter Voltage V(br)ceo: 80V 
  • Power Dissipation Pd: 12.5W 
  • DC Collector Current: 1.5A 
  • DC Current Gain hFE: 63hFE 
  • Transistor Case Style: TO-126 
  • No. of Pins: 3Pins 
  • Operating Temperature Max: 150°C
RM0.80
  • The most easy module to learn how to control the Stepper and finish the simple project.
  • The logic control voltage:3~5.5V
  • Motor Supply Voltage: 5~ 15V
  • it can sink 500mA from a 50V supply,but you'd better limit the driver voltage under 15v.
  • Operating temperature: -25 degree Celsius ~ +90 degree Celsius
RM2.20
  • Fitness and sports heart rate monitoring
  • Portable ECG
  • Remote health monitor
  • Game peripheral equipment
  • Bioelectricity signal collection
RM25.90