Free shipping by J&T Express for orders overRM100.00
Sort by
Show result
  • Use for: Arduino, Led Driver, CCTV Camera
  • Connector Type: Plug 5.5x2.1mm
  • Max Current Rating: 5A
  • Max Power Rating: 60W
  • Transmission Voltage: DC 1V to 38V
  • Compatible with Arduino/Genuino UNO, Leonardo, Mega, 101 (Intel Curie), Micro, Nano, Mini
  • I2C Address:0x20-0x27(0x20 default)
  • Back lit (Yellow with black char color)
  • Supply voltage: 5V
  • Interface:I2C/TWI x1,Gadgeteer interface x2
  • Adjustable contrast
  • Size:82x35x18 mm (3.2x1.4x0.7 in)
  • Works perfectly for any device that requires a power adapter with a 2.1mm x 5.5mm plug.
  • The low profile of flat cable enables it to hug surfaces and squeeze through tight or normally-unused spaces.
  • Long enough to give you quite a bit of leeway if your device's ideal installation spot isn't close to an outlet.
  • Application: LED light strip, LED signage, CCTV camera, lighting, car, boat, monitors, printers, sensors, DVR, external hard drives, audio mixing, and recording equipment, or anything that requires DC input and accepts 2.1mm x 5.5mm plug.
  • Input: 100-240VAC
  • Output: DC9V 2A
  • Input Plug: Malaysia 
  • Output Connector: 5.5x2.1mm DC plug
  • Dimensions: 75mm x 40mm x 60mm
  • Brand new and high quality
  • Material: Brass
  • Plating: Nickel plating
  • No of Way: 1/2/3/4/5/6/7/8/9/10
  • High-quality Plastic Holder
  • Small size, easy to carry
  • Embossed battery polarity marks
  • Mounting screw point
  • Size: 100x60x10mm
  • Material: Aluminium
  • Surface: Clear Anodized
  • Weight: 80g
  • High-quality Plastic Holder
  • Small size, easy to carry
  • Embossed battery polarity marks
  • Mounting screw point
  • Material: Nylon
  • Color: Black
  • Type: Hexagon
  • Tapping: M3x0.5mm
  • Value: 1.2, 12, 120, 1.2k, 12k, 120k, 1.2M ohm (Select in option)
  • Watt: 0.25 Watt
  • Tolerance: 5%
  • Type: Carbon film
  • Regulated DC 12V output
  • Standard water pipe fitting size
  • Shell is made of durable plastic material.
  • Can charge small battery, mobile phone, LED lights, etc.
  • NodeMCU based on ESP-WROOM-32 module
  • Based on ESP32 DEVKIT DOIT
  • 30 GPIO Version
  • ESP32 is a dual core 32-bit processor with built-in 2.4 GHz Wi-Fi and Bluetooth
  • 4MByte flash memory
  • 520KByte RAM
  • 2.2 tp 3.6V Operating voltage range
  • In breadboard friendly breakout
  • USB microB for power and Serial communication, use to load program and serial debugging too
  • Display Formate: 16 Character x 2 Line
  • Viewing Direction: 6 O’Clock
  • Input Data: 4-Bits or 8-Bits interface available
  • Display Font : 5 x 8 Dots
  • Power Supply : Single Power Supply (5V±10%)
  • Backlight: Yellow
  • Controller: SPLC780C or equivalent
  • Type: Electrolytic Capacitor
  • Capacitance: 470uF
  • Rated voltage: 25V
  • Body diameter: 8mm
  • Body Length: 12mm
  • Lead pitch: 3mm
  • Material: Nylon
  • Color: Black
  • Model: M3
  • Available Lenght: 6, 10, 15, 20, 25, 30 mm