Free shipping by J&T Express for orders overRM100.00
Bestsellers
Sort by
Show result
  • USB-A. This is the standard connector, found on one end of almost every USB cable.
  • USB-B. This is an older connector that's not used nearly as often nowadays.
  • Mini-USB. As the name suggests, this is a smaller connection type that's good for mobile devices.
  • Micro-USB. Android phone chargers, video game consoles.
  • Type-C. New laptops and phones, devices with combined data and power delivery.
RM1.60
  • Input: 100-240VAC
  • Output: DC3.3V 2A
  • Input Plug: Malaysia 
  • Output Connector: 5.5x2.1mm DC plug
  • Dimensions: 80mm x 55mm x 80mm
RM11.80
  • Rigid 3mm thickness mounting bracket 
  • Suitable for 775 series dc motor installation
  • Can use to build mini electric motorcycle, mini drill or cutting saw project
RM8.40
  • Mounting size: 22mm
  • Color avalable: Red, Yellow, Blue, Green, White (select in option)  
  • Insulation resistance: >= 2M ohms
  • Permitted Voltage: AC 240V 
  • Brightness: >= 100cd/m2 
  • Electrical Life: 30000 hours 
  • Protection grade: IP65
RM2.90
  • Transparent
  • 830 Tie Point
  • Self adhesive
  • Can be interlocked for larger projects
  • 2 power lanes
  • Horizontal: 1-60
  • Vertical: A-J
  • Dimensions: 15.5cm x 5.5cm
RM7.80
  • Low power consumption
  • Voltage range from DC 3.3V to 5V
  • Can directy drive by Arduino board with PWM output
  • Can generate tone between 1.5 ~ 2.5kHz
RM2.50
  • Convert industrial 4-20mA current signal output to 0-3.3V or 0-5.0V or 0-10.0V voltage signal
  • Accept wide supply voltage from DC 7 to 36V
  • Easy intergrate to low cost ADC module or microcontroller for signal processing
  • Output signal voltage range can be set
  • Suitable for Arduino and Raspberry pi
RM12.90
  • 12V Positive Voltage Regulator
  • Minimum Input Voltage is 7V
  • Maximum Input Voltage is 25V
  • Operating current(IQ) is 5mA     
  • Internal Thermal Overload and Short circuit current limiting protection is available.
  • Junction Temperature maximum 125 degree Celsius
  • Available in TO-220 and KTE package
RM0.80
  • Compatible with Arduino/Genuino UNO, Leonardo, Mega, 101 (Intel Curie), Micro, Nano, Mini
  • I2C Address:0x20-0x27(0x20 default)
  • Back lit (Blue with white char color)
  • Supply voltage: 5V
  • Interface:I2C/TWI x1,Gadgeteer interface x2
  • Adjustable contrast
  • Size:98x60x18 mm 
RM24.50
  • Diffuse reflective type
  • Light source: Infrared
  • Sensing range: 3cm to 80cm (depends on obstacle surface)
  • Input voltage: 5VDC
  • Current consumption: 100mA
  • NPN output
  • Dimension: 1.8cm (D) x 4.3cm (L)
  • Cable length: 45cm
RM12.70
  • Size: 30x30mm
  • Material: Nylon Plastic
  • Available Color: White, Black (Select in option)
  • Weight: 2g/pc
RM2.20
  • Type: Electrolytic Capacitor
  • Capacitance: 47uF
  • Rated voltage: 25V
  • Body diameter: 5mm
  • Body Length: 8mm
  • Lead pitch: 2.5mm
RM1.00
  • Type: Electrolytic Capacitor
  • Capacitance: 220uF
  • Rated voltage: 25V
  • Body diameter: 8mm
  • Body Length: 12.5mm
  • Lead pitch: 3.5mm
RM1.00
  • All 40 pins route to header
  • Compatible to most classic 51 microcontroller system
  • Crystal oscillator: Plug-in header for easy changing
  • With On/Off power switch
  • With DC power socket
  • P0 port with pull up resistor
RM8.90
  • Can be used to prevent reverse polarity problem
  • Half Wave and Full Wave rectifiers
  • Used as a protection device
  • Current flow regulators
RM1.00