Bestsellers
- Low power consumption
- Voltage range from DC 3.3V to 5V
- Can directy drive by Arduino board with PWM output
- Can generate tone between 1.5 ~ 2.5kHz
RM2.50
- Mounting size: 22mm
- Color avalable: Red, Yellow, Blue, Green, White (select in option)
- Insulation resistance: >= 2M ohms
- Permitted Voltage: AC 240V
- Brightness: >= 100cd/m2
- Electrical Life: 30000 hours
- Protection grade: IP65
RM2.90
- High sensitive and reliable, work under super low voltage
- Based on advanced infrared automatic control technology
- Widely used in a wide variety of auto-induction electric appliances, especially those powered by dry batteries
- Sensor module will be automatically triggered when someone enters its detection range
- Small size for easy operation
RM6.50
- Diffuse reflective type
- Light source: Infrared
- Sensing range: 3cm to 80cm (depends on obstacle surface)
- Input voltage: 5VDC
- Current consumption: 100mA
- NPN output
- Dimension: 1.8cm (D) x 4.3cm (L)
- Cable length: 45cm
RM12.70
- Size: 30x30mm
- Material: Nylon Plastic
- Available Color: White, Black (Select in option)
- Weight: 2g/pc
RM2.20
- Brand new and high quality
- Straight structure, waterproof and explosion-proof, heat and cold resistant
- Portable size and light weight, easy to install
- Flow range: 0.3-6 L/min
- Max. water pressure: 0.8 MPa
RM10.90
- Can be used to prevent reverse polarity problem
- HV supplies
- Half Wave and Full Wave rectifiers
- Used as a protection device
- Current flow regulators
RM1.20
- Ideal for P.C. Board mounting
- High surge current capability
- High temperature soldering guaranteed 265 C /10
- seconds at 5 lbs (2.3kg) tension
RM1.90
- Type: Electrolytic Capacitor
- Capacitance: 220uF
- Rated voltage: 25V
- Body diameter: 8mm
- Body Length: 12.5mm
- Lead pitch: 3.5mm
RM1.00
- Input: 100-240VAC
- Output: DC3.3V 2A
- Input Plug: Malaysia
- Output Connector: 5.5x2.1mm DC plug
- Dimensions: 80mm x 55mm x 80mm
RM11.80
- The is super strong magnet
- Very useful for DIY projects
- Rating: N35
- Size: 8(D)x6(T) mm
- Weight: 3g
RM1.20
- Diffused Junction
- Low Reverse Leakage Current
- Low Power Loss, High Efficiency
- Case to Terminal Isolation Voltage 2000V
RM1.90
- Convert industrial 4-20mA current signal output to 0-3.3V or 0-5.0V or 0-10.0V voltage signal
- Accept wide supply voltage from DC 7 to 36V
- Easy intergrate to low cost ADC module or microcontroller for signal processing
- Output signal voltage range can be set
- Suitable for Arduino and Raspberry pi
RM12.90
- 12V Positive Voltage Regulator
- Minimum Input Voltage is 7V
- Maximum Input Voltage is 25V
- Operating current(IQ) is 5mA
- Internal Thermal Overload and Short circuit current limiting protection is available.
- Junction Temperature maximum 125 degree Celsius
- Available in TO-220 and KTE package
RM0.80
- Type: Electrolytic Capacitor
- Capacitance: 47uF
- Rated voltage: 25V
- Body diameter: 5mm
- Body Length: 8mm
- Lead pitch: 2.5mm
RM1.00